Details

---

WESCOL Two-Stage Propane Regulator – 23 Bar, 0–4 Bar

The WESCOL TS7 Two-Stage Propane Regulator (Part No. RE0730) is designed for precise and controlled propane gas pressure regulation. Featuring a two-stage regulator design, it supports a maximum inlet pressure of 23 bar and provides an adjustable outlet pressure range of 0–4 bar, offering controlled gas delivery across a range of operating requirements.

The regulator is equipped with separate high-pressure (HP) and low-pressure (LP) gauges, allowing the operator to monitor both inlet and regulated outlet pressure. Both gauges have a 50 mm diameter, comply with ISO 5171, and display pressure in bar, kPa and psi for convenient monitoring.

Built around a robust CW614N brass body, the TS7 incorporates an ABS control knob, elastomer valve seat and diaphragm, steel springs, elastomer seals and a bronze inlet filter. The regulator is manufactured in accordance with BS EN ISO 2503 and features a BS 341 No. 2 inlet connection together with a G3/8 LH outlet connection.
For quality assurance, every regulator undergoes 100% leak checking, pressure testing, function testing and visual inspection. High- and low-pressure ports are clearly identified with “HP” and “LP” markings, while the date of manufacture is permanently engraved on the regulator body and remains externally visible for product identification and traceability.

Key Features & Benefits

• Two-stage propane pressure regulator
• Specifically designed for Propane
• Maximum inlet pressure of 23 bar
• Adjustable outlet pressure range of 0–4 bar
• Separate HP and LP pressure gauges
• 50 mm gauge diameter
• Gauge standard: ISO 5171
• Regulator manufactured in accordance with ISO 2503 / BS EN ISO 2503
• Durable CW614N brass body
• Ergonomic ABS control knob
• Elastomer valve seat and diaphragm
• Steel internal springs
• Bronze inlet filter
• BS 341 No. 2 inlet connection
• G3/8 LH outlet connection
• High- and low-pressure ports clearly marked “HP” and “LP”
• Permanently engraved date-of-manufacture marking
• 100% leak checked
• 100% pressure tested
• 100% function tested
• 100% visually inspected

Two-Stage Propane Regulation

The WESCOL TS7 uses a two-stage pressure-regulation configuration to reduce propane cylinder pressure to the required working pressure. With a maximum inlet pressure of 23 bar and an adjustable 0–4 bar outlet range, the regulator provides controlled pressure management for propane gas service.

The dual-gauge configuration provides independent monitoring of the high-pressure and low-pressure sides of the regulator, allowing the operator to view both supply and outlet pressure during use.
 

Technical Specifications

Specification	Details
Part Number	RE0730
Description	TS7.P.4.2G.SE.UK0 WESCOL
Regulator Type	Two Stage
Gas	Propane
Regulator Standard	ISO 2503
Maximum Inlet Pressure	23 bar
Outlet Pressure Range	0–4 bar
Inlet Connection	BS 341 No. 2
Inlet Position	Position 9
Inlet Stem Length	83 mm (70 mm visible)
Outlet Connection	G3/8 LH
Body Markings	High-pressure and low-pressure ports marked “HP” and “LP”
Date of Manufacture Marking	Permanently engraved on body and visible externally
Branding	WESCOL
Body Diameter	56.5 mm
Finish	Brass body
Gauge Configuration	HP and LP gauges
Gauge Standard	ISO 5171
Gauge Diameter	50 mm
Gauge Depth	28 mm
Gauge Range & Units	bar, kPa & psi
Gauge Ports	G1/4 (to EN 837)

 

WESCOL TS7 Two-Stage Propane Regulator — robust construction, dual-gauge monitoring and dependable pressure regulation for propane gas service.